Stabilizing BiVO4 Photoanode in Bicarbonate Electrolyte for Efficient Photoelectrocatalytic Alcohol Oxidation.

In order to expand the application of bismuth vanadate (BiVO4) to the field of photoelectrochemistry, researchers have explored the potential of BiVO4 in catalyzing or degrading organic substances, potentially presenting a green and eco-friendly solution. A study was conducted to investigate the impact of electrolytes on the photocatalysis of benzyl alcohol by BiVO4. The research discovered that, in an acetonitrile electrolyte (pH 9) with sodium bicarbonate, BiVO4 catalyzed benzyl alcohol by introducing saturated V5+. This innovation addressed the issue of benzyl alcohol being susceptible to catalysis in an alkaline setting, as V5+ was prone to dissolution in pH 9 on BiVO4. The concern of the photocorrosion of BiVO4 was mitigated through two approaches. Firstly, the incorporation of a non-aqueous medium inhibited the formation of active material intermediates, reducing the susceptibility of the electrode surface to photocorrosion. Secondly, the presence of saturated V5+ further deterred the leaching of V5+. Concurrently, the production of carbonate radicals by bicarbonate played a vital role in catalyzing benzyl alcohol. The results show that, in this system, BiVO4 has the potential to oxidize benzyl alcohol by photocatalysis.

Bioactive volatiles of brewer's yeasts: Antifungal action of compounds produced during wort fermentation on Aspergillus sp.

Previous investigations proved the potential of Saccharomyces cerevisiae MBELGA62 and Pichia kudriavzevii MBELGA61 as suitable biocontrolling agents against Aspergillus sp. through the production of soluble and volatile bioactive antifungal compounds. The present study delves into those finding by means of the identification of the volatile compounds produced by brewer's strains that demonstrated fungistatic and fungicidal effects against Aspergillus flavus and A. parasiticus when cultured in brewer's wort agar plates. Traditional brewer's yeasts such as S. cerevisiae MBELGA62 and Saccharomyces pastorianus SAFS235 synthetize volatiles that fully inhibited mycelial development for up to 9 days at 30 °C. The non-conventional brewer's strains P. kudriavzevii MBELGA61 and Meyerozyma guilliermondii MUS122 increased the lag phase by >100% and significantly reduced the fungal growth rate by 27.5-43.0% and 15.4-31.4%, respectively. In this context, 2-phenylethanol, 2-phenylethyl acetate and benzyl alcohol were identified as the main antifungal agents involved in Aspergillus sp.'s inhibition.

Physiological and Biochemical Analysis Revealing the Key Factors Influencing 2-Phenylethanol and Benzyl Alcohol Production in Crabapple Flowers.

Floral scent (FS) plays a crucial role in the ecological functions and industrial applications of plants. However, the physiological and metabolic mechanisms underlying FS formation remain inadequately explored. Our investigation focused on elucidating the differential formation mechanisms of 2-phenylethanol (2-PE) and benzyl alcohol (BA) by examining seven related enzyme concentrations and the content of soluble sugar, soluble proteins, carbon (C) and nitrogen (N), as well as the C/N ratio. The findings revealed that the peak content of 2-PE in M. 'Praire Rose' and BA in M. 'Lollipop' occurred during the end flowering stage (S4) and flowering stage (S3) periods, respectively. The enzyme concentration change trends of phenylpyruvate decarboxylase (PDL), phenylacetaldehyde reductase (PAR), soluble protein, C, N, and C/N ratio changes during the S3-S4 period in M. 'Praire Rose' and M. 'Lollipop' were entirely opposite. Correlation and PCA analysis demonstrated that the content of CYP79D73 (a P450) and N, and the C/N ratio were key factors in 2-PE production in M. 'Praire Rose'. The production of BA in M. 'Lollipop' was more influenced by the content of phenylacetaldehyde synthase (PAAS), CYP79D73, and soluble sugar. As CYP79D73 exits oppositely in correlation to 2-PE (M. 'Praire Rose') and BA (M. 'Lollipop'), it is hypothesized that CYP79D73 was postulated as the primary factor contributing to the observed differences of 2-PE (M. 'Praire Rose') and BA (M. 'Lollipop') formation. These results carry significant implications for crabapple aromatic flower breeding and the essential oil industry etc.

Microscopic-Level Insights into P-O-Induced Strong Electronic Coupling Over Nickel Phosphide with Efficient Benzyl Alcohol Electrooxidation.

Electrooxidation of biomass into fine chemicals coupled with energy-saving hydrogen production for a zero-carbon economy holds great promise. Advanced anode catalysts determine the cell voltage and electrocatalytic efficiency greatly, further the rational design and optimization of their active site coordination remains a challenge. Herein, a phosphorus-oxygen terminals-rich species (Ni2 P-O-300) via an anion-assisted pyrolysis strategy is reported to induce strong electronic coupling and high valence state of active nickel sites over nickel phosphide. This ultimately facilitates the rapid yet in-situ formation of high-valence nickel with a high reaction activity under electrochemical conditions, and exhibits a low potential of 1.33 V vs. RHE at 10 mA cm-2 , exceeding most of reported transition metal-based catalysts. Advanced spectroscopy, theoretical calculations, and experiments reveal that the functional P-O species can induce the favorable local bonding configurations for electronic coupling, promoting the electron transfer from Ni to P and the adsorption of benzyl alcohol (BA). Finally, the hydrogen production efficiency and kinetic constant of BA electrooxidation by Ni2 P-O-300 are increased by 9- and 2.8- fold compared with the phosphorus-oxygen terminals-deficient catalysts (Ni2 P-O-500). This provides an anion-assisted pyrolysis strategy to modulate the electronic environment of the Ni site, enabling a guideline for Ni-based energy/catalysis systems.

Enhanced Electrochemical Hydrogenation of Benzaldehyde to Benzyl Alcohol on Pd@Ni-MOF by Modifying the Adsorption Configuration.

Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 µmol cm-2 h-1 with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency.

Systematic engineering enables efficient biosynthesis of L-phenylalanine in E. coli from inexpensive aromatic precursors.

BACKGROUND: L-phenylalanine is an essential amino acid with various promising applications. The microbial pathway for L-phenylalanine synthesis from glucose in wild strains involves lengthy steps and stringent feedback regulation that limits the production yield. It is attractive to find other candidates, which could be used to establish a succinct and cost-effective pathway for L-phenylalanine production. Here, we developed an artificial bioconversion process to synthesize L-phenylalanine from inexpensive aromatic precursors (benzaldehyde or benzyl alcohol). In particular, this work opens the possibility of L-phenylalanine production from benzyl alcohol in a cofactor self-sufficient system without any addition of reductant. RESULTS: The engineered L-phenylalanine biosynthesis pathway comprises two modules: in the first module, aromatic precursors and glycine were converted into phenylpyruvate, the key precursor for L-phenylalanine. The highly active enzyme combination was natural threonine aldolase LtaEP.p and threonine dehydratase A8HB.t, which could produce phenylpyruvate in a titer of 4.3 g/L. Overexpression of gene ridA could further increase phenylpyruvate production by 16.3%, reaching up to 5 g/L. The second module catalyzed phenylpyruvate to L-phenylalanine, and the conversion rate of phenylpyruvate was up to 93% by co-expressing PheDH and FDHV120S. Then, the engineered E. coli containing these two modules could produce L-phenylalanine from benzaldehyde with a conversion rate of 69%. Finally, we expanded the aromatic precursors to produce L-phenylalanine from benzyl alcohol, and firstly constructed the cofactor self-sufficient biosynthetic pathway to synthesize L-phenylalanine without any additional reductant such as formate. CONCLUSION: Systematical bioconversion processes have been designed and constructed, which could provide a potential bio-based strategy for the production of high-value L-phenylalanine from low-cost starting materials aromatic precursors.

{Ru(C6 H6 )}-Decorating Heteropolymolybdate for Highly Activity Photocatalytic Oxidation of Benzyl Alcohol to Benzaldehyde.

An unclassical structure of {Ru(C6 H6 )}-based polyoxometalate, Cs6 H4 [Te2 Mo12 O46 {Ru(C6 H6 )}] ⋅ 16.5H2 O (1), has been successfully constructed from {Te2 Mo12 O46 }-type heteropolymolybdate and {Ru(C6 H6 )} group, which structure type was discovered for the first time. Compound 1 not only possesses strong light-harvesting ability, but also exhibits high carrier separation efficiency and lower charge transfer resistance. Under visible light irradiation, compound 1 displayed excellent catalytic activity and circularity in the conversion of benzyl alcohol to benzaldehyde (yield=94 %; turnover number=500; turnover frequency=20.8 h-1 ). Finally, the electron paramagnetic resonance measurement and energy level matching analysis provide theoretical basis for the derivation of the reaction mechanism.

Carbon Quantum Dots/Cu2O Photocatalyst for Room Temperature Selective Oxidation of Benzyl Alcohol.

The luminescence properties and excellent carrier transfer ability of carbon quantum dots (CQDs) have attracted much attention in the field of photocatalysis. In this work, we loaded the CQDs on the surface of Cu2O to enhance the visible-light property of Cu2O. Furthermore, the composite was used for selective oxidation of benzyl alcohol to benzaldehyde. The composite catalyst achieved high selectivity (90%) for benzaldehyde at room temperature, leveraging its visible-light-induced electron transfer properties and its photocatalytic activity for hydrogen peroxide decomposition. ·OH was shown to be the main reactive oxygen species in the selective oxidation reaction of benzyl alcohol. The formation of heterostructures of CQDs/Cu2O promoted charge carrier separation and provided a fast channel for photoinduced electron transfer. This novel material exhibited enhanced levels of activity and stability for selective oxidation of benzyl alcohol. Potential applications of carbon quantum dot composites in conventional alcohol oxidation reactions are shown.

Regulating the Active Sites of Cs2 AgBiCl6 by Doping for Efficient Coupling of Photocatalytic CO2 Reduction and Benzyl Alcohol Oxidation.

Halide perovskites exhibit outstanding optoelectronic properties, which make them an ideal choice for photocatalytic CO2 reduction and benzyl alcohol (BA) oxidation. Nevertheless, the simultaneous realization of the above redox coupling reactions on halide perovskites remains a great challenge, as it requires distinct catalytic sites for different target reactions. Herein, the catalytic sites of Cs2 AgBiCl6 (CABC) are regulated by doping Fe for efficient coupling of photocatalytic CO2 reduction and BA oxidation. The Fe-doped CABC (Fe: CABC) exhibits an enhanced visible-light response and effective charge separation. Experimental results and theoretical calculations reveal a synergistic interplay between Bi and Fe sites, where the Bi and Fe sites have lower activation energies toward CO2 reduction and BA oxidation. Further investigations demonstrate that electrons and holes prefer to accumulate at the Bi site and Fe site under light irradiation, respectively, which creates favorable conditions for facilitating CO2 reduction and BA oxidation. The resultant Fe: CABC achieves a high photocatalytic performance toward CO (18.5 µmol g-1  h-1 ) and BD (1.1 mmol g-1  h-1 ) generation, which surpasses most of the state-of-the-art halide photocatalysts. This work demonstrates a facile strategy for regulating the catalytic site for redox coupling reactions, which will pave a new way for designing halide perovskites for photocatalysis.

Toxicity and Repellency Efficacy of Benzyl Alcohol and Benzyl Benzoate as Eco-Friendly Choices to Control the Red Flour Beetle Tribolium castaneum (Herbst. 1797).

Tribolium castaneum is a damaging pest of stored grains, causing significant losses and secreting lethal quinones, which render the grains unfit for human consumption. Chemical insecticides are the most commonly used approach for control; however, they create insecticide resistance and affect the health of humans, animals, and the environment. As a result, it is critical to find an environmentally friendly pest-management strategy. In this study, two naturally occurring chemicals, benzyl alcohol (BA) and benzoyl benzoate (BB), were investigated for insecticidal activity against T. castaneum using different assays (impregnated-paper, contact toxicity, fumigant, and repellency assays). The results showed that BA had a significant insecticidal effect, with the LC50 achieved at a lower concentration in the direct-contact toxicity test (1.77%) than in the impregnated-paper assay (2.63%). BB showed significant effects in the direct-contact toxicity test, with an LC50 of 3.114%, and a lower toxicity in the impregnated-paper assay, with an LC50 of 11.75%. Furthermore, BA exhibited significant fumigant toxicity against T. castaneum, with an LC50 of 6.72 µL/L, whereas BB exhibited modest fumigant toxicity, with an LC50 of 464 µL/L. Additionally, at different concentrations (0.18, 0.09, 0.045, and 0.0225 µL/cm2), BA and BB both showed a notable and potent repelling effect. BA and BB significantly inhibited acetylcholinesterase, reduced glutathione (GSH), and increased malondialdehyde (MDA) in treated T. castaneum. This is the first report of BA insecticidal activity against the red flour beetle. Also, the outcomes of various assays demonstrated that the application of BA induces a potent bio-insecticidal effect. BA may be a promising eco-friendly alternative to control T. castaneum due to its safety and authorization by the EFSA (European Food Safety Authority).

New insight into highly efficient CSA@g-C3 N4 for photocatalytic oxidation of benzyl alcohol and thioanisole: NAEDS as a promoter of photoactivity under blue LED irradiation.

An open new perspective has been established toward synthesizing eco-friendly CSA@g-C3 N4 employing surface engineering. The carbon nitride modified through camphorsulfonic acid was designed and developed in a category of the new generation of photocatalysts for the oxidation of benzyl alcohol and thioanisole in the existence of a natural deep eutectic solvent (NADES). In comparison with pure g-C3 N4 , not only does CSA@g-C3 N4 exhibit an extraordinarily higher ability for harvesting visible light stemming from declining the recombination rate of electrons/holes dependent on PL results but it also reveals notable photocatalytic oxidation capability in the transformation of alcohols as well as thiols into relevant compounds. In addition, non-metal compound (CSA) incorporation would result in considerably diminishing the energy band gap value from 2.8 to 2.28 eV to escalate the visible-light absorption of g-C3 N4 . While the conventional consensus implies that inherent properties of photocatalysts bring on high photoactivity, this study indicates that deploying choline chloride-urea deep eutectic solvent as an external factor plays the role of photoactivity accelerator. Furthermore, readily recycling and reusability can be achieved for the photocatalytic setup of CSA@g-C3 N4 ascribed to its heterogeneous nature with no drop in the photoactivity.

A Metal-Organic Complex Constructed from Co(II), Azo-amide-pyridyl and Benzenetricarboxylate Mixed Ligands: Efficient Catalysis for Selective Oxidation of Benzyl Alcohols to Benzyl Acids.

By using one-step hydrothermal synthesis, a novel metal-organic complex containing Co(II), the azo-amide-pyridyl ligand (E)-4,4'-(diazene-1,2-diyl)bis(N-(pyridin-3-yl)benzamide (DABA) and benzenetricarboxylate was synthesized, with a molecular formula of [Co2 (DABA)0.5 (MTC)(µ3 -OH)(H2 O)2 ] ⋅ 2H2 O (namely 1, DABA=(E)-4,4'-(diazene-1,2-diyl)bis(N-(pyridin-3-yl)benzamide, H3 MTC=1,2,4-benzenetricarboxylic acid) which was characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. In the structure of complex 1, tetranuclear Co(II) clusters were connected by MTC to form a 2D bilayer structure and further constructed a 3D structure with DABA ligand. Complex 1 was used as an efficient heterogeneous catalyst for the oxidation of benzyl alcohol, and the conversion rate of benzyl alcohol reached 98.6 % and the selectivity of benzoic acid reached 94.8 %. In addition, complex 1 can be reused 5 times without significant loss of activity. The oxidation of benzyl alcohol with different substituents also showed satisfactory conversion and selectivity, indicating that complex 1 had good catalytic performance.

Oxidant-Free Electrochemical Direct Oxidative Benzyl Alcohols to Benzyl Aldehydes Using Three-Dimensional Printing PPAR Polyoxometalate.

The oxidation of benzyl alcohols is an important reaction in organic synthesis. Traditional methods for benzyl alcohol oxidation have not been widely utilized due to the use of significant amounts of precious metals and environmentally unfriendly reagents. In recent years, electrocatalytic oxidation has gained significant attention, particularly electrochemical anodic oxidation, which offers a sustainable alternative for oxidation without the need for external oxidants or reducing agents. Here, a copper monosubstituted phosphotungstate-based polyacrylate resins (Cu-LPOMs@PPAR) catalyst has been fabricated with immobilization and recyclability using 3D printing technology that can be successfully applied in the electrocatalytic oxidation of benzyl alcohol to benzaldehyde, achieving atom economy and reducing pollution. In this protocol, we obtain benzaldehyde in good yields with excellent functional group toleration under metal-free and oxidant-free conditions. This strategy could provide a new avenue for heterogeneous catalysts in application for enhancing the efficiency and selectivity of electrocatalytic oxidation processes.

Photoredox Coupling of CO2 Reduction with Benzyl Alcohol Oxidation over Ternary Metal Chalcogenides (ZnmIn2S3+m, m = 1-5) with Regulable Products Selectivity.

Integrating photocatalytic CO2 reduction with selective benzyl alcohol (BA) oxidation in one photoredox reaction system is a promising way for the simultaneous utilization of photogenerated electrons and holes. Herein, ZnmIn2S3+m (m = 1-5) semiconductors (ZnIn2S4, Zn2In2S5, Zn3In2S6, Zn4In2S7, and Zn5In2S8) with various composition faults were synthesized via a simple hydrothermal method and used for effective selective dehydrocoupling of benzyl alcohol into high-value C-C coupling products and reduction of CO2 into syngas under visible light. The absorption edge of ZnmIn2S3+m samples shifted to shorter wavelengths as the atomic ratio of Zn/In was increased. The conduction band and valence band position can be adjusted by changing the Zn/In ratio, resulting in controllable photoredox ability for selective BA oxidation and CO2 reduction. For example, the selectivity of benzaldehyde (BAD) product was reduced from 76% (ZnIn2S4, ZIS1) to 27% (Zn4In2S7, ZIS4), while the selectivity of hydrobenzoin (HB) was increased from 22% to 56%. Additionally, the H2 formation rate on ZIS1 (1.6 mmol/g/h) was 1.6 times higher than that of ZIS4 (1.0 mmol/g/h), and the CO formation rate on ZIS4 (0.32 mmol/g/h) was three times higher than that of ZIS1 (0.13 mmol/g/h), demonstrating that syngas with different H2/CO ratios can be obtained by controlling the Zn/In ratio in ZnmIn2S3+m. This study provides new insights into unveiling the relationship of structure-property of ZnmIn2S3+m layered crystals, which are valuable for implementation in a wide range of environment and energy applications.

A DFT investigation of the catalytic oxidation of benzyl alcohol using graphene oxide.

CONTEXT: Metal-free heterogeneous materials have attracted great interest due to their potential to facilitate various organic transformations in line with circular economy and green chemistry principles. Among various 2D materials, graphene oxide (GO) is considered an attractive material for numerous applications in physics, chemistry, biology, material sciences, and catalysis. Furthermore, graphene-based catalysts exhibit good catalytic activity toward the selective oxidation of benzyl alcohol to benzaldehyde or benzoic acid under eco-friendly conditions. In this regard, a theoretical investigation was carried out to study both catalytic oxidation reaction pathways (i.e., benzyl alcohols to aldehyde and to benzoic acid) using GO as an eco-friendly and metal-free catalyst. METHODS: In this study, we report a theoretical investigation at the B3LYP/6-31G level to better understand the oxidation of benzyl alcohol using GO as a metal-free catalyst. The possible bond formation was investigated using the global and local reactivity indexes derived from Fukui functions. Furthermore, we performed a non-covalent interaction (NCI) analysis to unveil the stability and the interaction nature between both reagents and GO surface. The effect of the solvent on the oxidation efficiency was also performed and the results indicate that the solvent significantly affects the decrease of reactivity by increasing the activation barriers through oxidation reactions of benzyl alcohol. Additionally, the electron localization function (ELF) analysis was performed for all intermediates showing the ionic nature of the studied epoxide structure of GO and rules out any type of covalent interaction during the oxidation reaction of benzyl alcohol. All these obtained results are in good agreement with experimental observations and reveal that the epoxide functions on the graphene surface promote an excellent catalyst turnover.

Endophytic fungal community of Rosa damascena Mill. as a promising source of indigenous biostimulants: Elucidating its spatial distribution, chemical diversity, and ecological functions.

The role of endophytes in maintaining healthy plant ecosystems and holding promise for agriculture and food security is deeply appreciated. In the current study, we determine the community structure, spatial distribution, chemical diversity, and ecological functions of fungal endophytes of Rosa damascena growing in the North-Western Himalayas. Culture-dependent methods revealed that R. damascena supported a rich endophyte diversity comprising 32 genera and 68 OTUs. The diversity was governed by climate, altitude, and tissue type. Species of Aspergillus, Cladosporium, Penicillium, and Diaporthe were the core endophytes of the host plant consisting of 48.8% of the endophytes collectively. The predominant pathogen of the host was Alternaria spp., especially A. alternata. GC-MS analyses affirmed the production of diverse arrays of volatile organic compounds (VOC) by individual endophytes. Among the primary rose oil components, Diaporthe melonis RDE257, and Periconia verrucosa RDE85 produced phenyl ethyl alcohol (PEA) and benzyl alcohol (BA). The endophytes displayed varied levels of plant growth-promoting, colonization, and anti-pathogenic traits. Between the selected endophytes, P. verrucosa and D. melonis significantly potentiated plant growth and the flavonoids and chlorophyll content in the host. The potential of these two endophytes and their metabolites PEA and BA was confirmed on Nicotiana tabacum. The treatments of the metabolites and individual endophytes enhanced the growth parameters in the model plant significantly. The results imply that P. verrucosa and D. melonis are potential plant growth enhancers and their activity may be partially due to the production of PEA and BA. Thus, R. damascena harbors diverse endophytes with potential applications in disease suppression and host growth promotion. Further investigations at the molecular level are warranted to develop green endophytic agents for sustainable cultivation of R. damascena and biocontrol of leaf spot disease.

Efficient Dual-Function Catalyst: Palladium-Copper Nanoparticles Immobilized on Co-Cr LDH for Seamless Aerobic Oxidation of Benzyl Alcohol and Nitrobenzene Reduction.

Layered double hydroxides (LDHs) present exciting possibilities across various industries, ranging from catalytic applications to water remediation. By immobilizing nanoparticles, LDHs' characteristics and functionality can be enhanced, allowing for synergetic interactions that further expand their potential uses. A simple chemical method was developed to produce well-dispersed Pd-Cu NPs on a Co-Cr LDH support using a combination of in situ coprecipitation/hydrothermal and sol-immobilization techniques. The Pd-Cu@Co-Cr LDH catalysts was obtained, showing its catalytic activity in promoting the aerobic oxidation of alcohols and enabling the reduction of nitro-compounds through NaBH4 mediation. The physicochemical properties of the prepared catalyst were comprehensively investigated utilizing a range of analytical techniques, comprising FTIR, XRD, XPS, TGA, nitrogen adsorption isotherm, FESEM, and HRTEM-EDX. The findings showed the significance of immobilizing the bimetallic Pd-Cu nanoparticles on the Co-Cr LDH via an exceptional performance in the aerobic oxidation of benzyl alcohol (16% conversion, 99.9% selectivity to benzaldehyde) and the reduction of nitrobenzene (98.2% conversion, rate constant of 0.0921 min-1). The improved catalytic efficacy in benzyl alcohol oxidation and nitrobenzene reduction on the Pd-Cu@Co-Cr LDH catalyst is attributed to the uniform distribution and small size of the Pd-Cu NPs as active sites on the Co-Cr LDH surface. The prepared catalyst demonstrated exceptional stability during repeated runs. This study paves the way for multiple opportunities in tailoring, producing, and precisely controlling catalysts for various organic transformation reactions.

In-situ producing CsPbBr3 nanocrystals on (001)-faceted TiO2 nanosheets as S­scheme heterostructure for bifunctional photocatalysis.

Fabricating a cost-effective yet highly active photocatalyst to reduce CO2 to CO and oxidize benzyl alcohol to benzaldehyde simultaneously, is challenging. Herein, we construct an S-scheme 0D/2D CsPbBr3/TiO2 heterostructure for bifunctional photocatalysis. An in-situ synthetic route is used, which enables the precise integration between CsPbBr3 nanocrystals and ultrathin TiO2 nanosheets exposed with (001) facets (termed as TiO2-001), resulting in a tightly coupled heterointerface and desirable band offsets. The as-prepared CsPbBr3/TiO2-001heterojunctions exhibit boosted charge carrier kinetics, particularly, quick carrier separation/transfer and efficient utilization. Experimental results and theoretical calculations validate the S-scheme route in CsPbBr3/TiO2-001, which allows the enrichment of strongly conserved electrons-holes at conduction and valence bands of CsPbBr3 and TiO2-001, respectively. Consequently, compared to its counterparts, an excellent bifunctional activity (with 24 h reusability) is realized over CsPbBr3/TiO2-001, where the production rate of CO and benzaldehyde reach up to 78.06 µmol g-1h-1 and 1.77 mmol g-1h-1 respectively, without employing any sacrificial agents. This work highlights the development of perovskite-based heterostructures and describes the efficient harnessing of redox potentials and charge carriers towards combined photocatalytic systems.

Hydrogen Bonded Dimer of an Alcohol with the Derived Carboxylic Acid Triggering their Sorption by Nanoporous-crystalline PPO Films.

Films exhibiting nanoporous-crystalline (NC) phases of poly(2,6-dimethyl-1,4-phenylene) oxide (PPO), which are highly effective to absorb apolar organic guest molecules, are also able to absorb polar molecules (like alcohols and carboxylic acids) but only from concentrated organic solutions. NC PPO films, which do not absorb alcohols and carboxylic acids from diluted aqueous solutions, exhibits a huge uptake (even above 30 wt %) of benzyl alcohol (BAL) and benzoic acid (BA), if BA is obtained by spontaneous room temperature oxidation of BAL in aqueous solution. This phenomenon is rationalized by an easy uptake, mainly by the PPO intrahelical crystalline empty channels, of a BAL/BA 1/1 hydrogen-bonded dimer. This huge uptake of BAL/BA dimer by NC PPO films, which is also fast for films exhibiting the orientation of the crystalline helices perpendicular to the film plane (c⊥ orientation), can be exploited for purification of water from BAL, when present in traces. High and fast sorption of a hydrogen bonded dimer and negligible sorption of the two separate compounds is possibly unprecedented for absorbent materials.